Back to the newsletter

    Lanco Newsletter · November 16, 2026 · Prompt guide

    Three AI drafts you can use this week

    The full prompt guide for the November 16, 2026 Lanco Newsletter

    By Nic Polanco Jr. · Port St. Lucie, FL · For Treasure Coast owners

    This page goes with the November 16 Lanco Newsletter. The email gave you three short prompts. This guide walks through each one in more detail.

    You will see what problem it solves, when to use it, how to set it up, a prompt you can copy, a filled in sample, and how to review the draft before you use it. I also added extra tips and a couple of variation prompts for each one.

    These tools can help you start a first draft when you are already on a job and a lead is waiting. They do not send anything for you. You stay in charge.

    Grab a coffee and dig in.

    Keep customer data safe

    Review each draft before you use it. Do not paste names, phone numbers, addresses, or other private details into a chat.

    Share only the task, your trade, and the service. After you like the draft, add the real name and details in your own email, checklist, or post.

    Start a new chat for each draft so old work does not mix with a new one. If a tool offers a temporary chat, that can help for a one time draft, but still leave private details out.

    These samples on this page are made up. They are not real customers, and they are not live results from a test.

    01

    ChatGPT for customer emails

    When a new lead writes in, a slow first reply can cost you the job, especially if you are already on site. ChatGPT can draft a short note that confirms you got the request, offers a time, and asks one yes or no question.

    Treat the result as a first draft. Read it, fix the voice so it sounds like you, add the real name and details, and cut any price or promise it invented. Send only after that pass.

    What problem it solves

    You get a message while your hands are full. You do not want to leave the person waiting, and you also do not want to type a careful email from a job site. A short draft gets you moving. You still make it sound like you before it goes out.

    When to use it

    • A new lead asked about a service you actually offer.
    • You can offer a real day and time.
    • You need a first reply, not a full quote.

    Skip it when The job is already priced., Someone is upset., The request is unclear.. In those cases, write it yourself or call.

    Set it up, step by step

    1. Open ChatGPT and sign in.
    2. Start a new chat.
    3. Copy the prompt below.
    4. Replace the brackets with your trade, the service they asked about, and a day and time you can really offer.
    5. Do not paste the person's name, phone, or address into the chat.
    6. Generate the draft, then copy it into your own email tool.
    7. Review it using the checklist later in this section, then send it yourself.

    Copy this prompt

    Write a short email from a local [trade] business about [service]. Confirm we got the request, offer [day and time], and ask one yes or no question. Do not invent a price or promise.

    A filled in sample

    This is a made up example. Harbor Light HVAC is not a real business. There is no real customer here. The sample is only here so you can see how to fill the prompt and what a careful draft can look like. Your result will differ.

    Sample input (brackets filled in):

    Sample input
    Write a short email from a local HVAC business about an AC checkup. Confirm we got the request, offer Thursday at 2:00 PM, and ask one yes or no question. Do not invent a price or promise.

    What a careful draft can look like:

    Sample only
    Subject: We got your AC checkup request
    
    Hi there,
    
    Thanks for writing. We got your request for an AC checkup.
    
    I have Thursday at 2:00 PM open. Does that time work for you?
    
    If Thursday does not work, write back with a better day and I will check what we have.
    
    Thank you,
    Alex
    Harbor Light HVAC

    How to review and fix the draft

    Read the draft out loud. If it does not sound like you, change it until it does. Then check all of this before you send:

    • The service matches what they asked for.
    • The day and time are still open on your calendar.
    • There is no price, discount, or promise you did not approve.
    • There is only one yes or no question.
    • The brackets are gone. No leftover "[trade]" or "[service]".
    • You added the real first name, your name, your business name, and your real phone or email in your own tool, not in the chat.
    • The subject line is plain and clear.
    • Nothing in the draft would surprise you if the person forwarded it to a neighbor.

    Common mistakes

    • Sending the first draft without a read through.
    • Pasting the lead's name, phone, or address into the chat.
    • Leaving the brackets in the email.
    • Letting it invent a price, a same day visit, or a promise you did not make.
    • Asking three questions, which makes it harder to get a reply.
    • Offering three time slots and confusing the person.
    • Starting with "I hope this email finds you well." Cut that. Say you got the request.

    Extra tips and tricks

    1. Keep the email short. Five to eight sentences is plenty. A busy owner will read a short note.
    2. Offer one real time, not a menu. If they cannot do that time, they will tell you.
    3. Ask one yes or no question, like "Does Thursday at 2:00 PM work for you?" That is easier to answer than "What works?"
    4. Once you like a draft, save it as a snippet on your phone. The next time a similar request comes in, you can start from your own words and only change the time.
    5. If the lead wrote by text, you can ask ChatGPT to make the same draft even shorter for a text. Still add the real name yourself, and still review it before you send.

    Variation prompts

    Shorter text reply:

    Write a short text from a local [trade] business about [service]. Confirm we got the request, offer [day and time], and ask one yes or no question. Keep it under 40 words. Do not invent a price or promise. Do not include a name or phone number.

    They need a different day:

    Write a short email from a local [trade] business. Thank them for the reply, offer [new day and time] instead, and ask one yes or no question. Do not invent a price or promise.
    02

    Claude for job checklists

    A job that lives as a paragraph in your notes is hard to hand off, and a new team member will miss a step. Claude can turn the steps you already wrote into a numbered checklist from arrival to closeout, in plain language. It should not add work you did not mention.

    Paste only the steps, not customer names or private details. Walk the draft against a real job, add the checks you know are missing, and share the version you trust, not the first list it gives you.

    What problem it solves

    The steps are in your head, or in a long note on your phone. That works when you are the one on the job. It falls apart when you send someone new. A clear numbered list makes the handoff easier, and it gives you a page to improve after each job.

    When to use it

    • You already know the steps and can write them down, even in a messy way.
    • You want a list a new team member can follow.
    • You are turning one kind of job into a repeatable checklist, like a standard install or a standard closeout.

    Skip it when The job is unusual., Safety steps are still unclear., You have not done the work yourself yet.. In those cases, write it yourself or call.

    Set it up, step by step

    1. Open Claude and sign in.
    2. Start a new chat.
    3. In a note on your phone or a doc, write the steps you already use. Leave out names, addresses, and private details.
    4. Copy the prompt below, then paste your steps where it says to.
    5. Generate the checklist.
    6. Print it or save it, then walk it on a real job before you hand it to anyone.

    Copy this prompt

    Turn these job notes into a numbered checklist a new team member can follow, in order from arrival to closeout. Use plain language. Do not add steps I did not mention. Notes: [paste steps only]

    A filled in sample

    This is a made up example. Palm Court Painting is not a real company. These notes are sample steps only. They are not from a real job or a real home.

    Sample input (brackets filled in):

    Sample input
    Turn these job notes into a numbered checklist a new team member can follow, in order from arrival to closeout. Use plain language. Do not add steps I did not mention. Notes:
    Park in the driveway and check in with the site lead before unloading.
    Lay floor protection in the work area and tape it down.
    Open windows or set the fan before you start to sand.
    Sand the trim, then wipe the dust.
    Caulk the gaps, then let it set.
    Brush the trim, then roll the walls, two coats.
    Walk the room with the site lead, note touch ups, and clean the brushes.
    Carry out the trash and take the floor protection up last.

    What a careful draft can look like:

    Sample only
    1. Park in the driveway.
    2. Check in with the site lead before you unload.
    3. Lay floor protection in the work area and tape it down.
    4. Open the windows or set the fan before you start to sand.
    5. Sand the trim.
    6. Wipe the dust.
    7. Caulk the gaps and let it set.
    8. Brush the trim.
    9. Roll the walls, two coats.
    10. Walk the room with the site lead and note touch ups.
    11. Clean the brushes.
    12. Carry out the trash.
    13. Take the floor protection up last.

    How to review and fix the draft

    Walk the list against a job you know well. If a step is missing, you add it. Do not ask the tool to guess. Check all of this before you share it:

    • The order matches how you actually do the work.
    • It did not add tools, products, times, or safety steps you did not mention.
    • The language is plain enough for a new team member.
    • There are no customer names or addresses in the list.
    • Closeout is complete: cleanup, sign off, and what leaves the site.
    • You added any must do safety checks yourself, in your own words.

    Common mistakes

    • Pasting a whole job note that includes the customer's name or address.
    • Accepting extra steps the tool added to look helpful.
    • Sharing the first list with the team before you walk it on a job.
    • Mixing two types of jobs in one list, like a repair and a full install.
    • Leaving the steps as a paragraph instead of a numbered list.
    • Using the checklist as a quote or a promise to a customer. It is an internal handoff tool until you say otherwise.

    Extra tips and tricks

    1. Write the messy notes first, in the order you do the work. The prompt is for cleanup, not for inventing the job.
    2. Make one checklist per job type. A water heater swap and a leak check should not share a list.
    3. After you walk the job, add the missing checks yourself, then save that version as the one the team uses.
    4. If a step is unclear, do not let the tool guess. Change the note so it is clear, and run the prompt again.
    5. Keep a simple "before you leave the shop" list separate from the on site list, so the truck is packed before anyone rolls out.

    Variation prompts

    Ask it to flag gaps, not fill them:

    Turn these job notes into a numbered checklist a new team member can follow, in order from arrival to closeout. Use plain language. Do not add steps I did not mention. After the list, add a short section called Questions, and list anything that is unclear. Notes: [paste steps only]

    Before you leave the shop:

    Turn these notes into a numbered truck packing list a new team member can follow before leaving the shop. Use plain language. Do not add items I did not mention. Notes: [paste the pack list only]
    03

    Gemini for marketing posts

    Your website or a past update already explains what you do, but turning that into posts still takes time, and a rushed caption can invent a claim you would not make. Give Gemini that existing text and ask for three short posts that stay plain and helpful, and that invite someone to call or write.

    You should get three drafts to edit, not new reviews, prices, or results. Change any line that does not sound like your business, and post only the version you have checked.

    What problem it solves

    You already said it on your website, in a flyer, or in an old post. You still need a few short updates for the week, and you do not want to write them from scratch in a parking lot. Gemini can turn words you already approved into three short drafts. You pick one, fix it, and add your real phone number or link before you post.

    When to use it

    • You have existing text you already stand behind, like a service page or a past update.
    • You need a few short posts, not a new ad campaign.
    • You want the posts to stay helpful and plain.

    Skip it when You have no source text., You want to promote a price you have not approved., You are asking people for a review of a job you have not finished.. In those cases, write it yourself or call.

    Set it up, step by step

    1. Open Gemini and sign in if you use a Google account.
    2. Start a new chat.
    3. Copy a short block of text you already use, like a service description from your website. Do not paste reviews with last names, private details, or anything you would not want in a chat.
    4. Copy the prompt below, paste your text at the end, and replace [trade] with your trade.
    5. Generate the three drafts.
    6. Edit the one you like, add your real phone number or "write us" link, and post it yourself.

    Copy this prompt

    Turn the text below into 3 short social posts for a local [trade] business. Keep the tone plain and helpful. Include an invite to call or write. Do not invent reviews, prices, or results. Text: [paste your existing description]

    A filled in sample

    This is a made up example. Tidewater Lawn Care is not a real company. The source text is sample website copy, not a live page.

    Sample input (brackets filled in):

    Sample input
    Turn the text below into 3 short social posts for a local lawn care business. Keep the tone plain and helpful. Include an invite to call or write. Do not invent reviews, prices, or results. Text: Tidewater Lawn Care serves homes in Stuart and nearby towns. We handle weekly mowing, hedge trimming, and seasonal cleanups. We show up on the day we say we will, and we leave the walkways blown off. If you want a yard plan, call or write and tell us about your lot.

    What a careful draft can look like:

    Sample only
    Post 1:
    Need weekly mowing in Stuart or nearby? We also handle hedge trimming and seasonal cleanups. We show up on the day we say we will. Call or write and tell us about your lot.
    
    Post 2:
    A clean walkway at the end of a visit should be normal. We mow, trim hedges, and blow off the walkways when the job is done. If you want a yard plan, call or write and we will talk it through.
    
    Post 3:
    Seasonal cleanups are easier when they are on the calendar. We serve homes in Stuart and nearby towns with weekly mowing, hedge trimming, and cleanups. Call or write if you want help planning the next one.

    How to review and fix the draft

    Read each post next to your source text. If a claim is not in the source, cut it. Check all of this before you post:

    • Every fact already appears in your source text, or is a simple restatement of it.
    • There are no reviews, star ratings, prices, or results that you did not provide.
    • It sounds like your business, not like a generic ad.
    • The invite to call or write is there, and you added your real number or link yourself.
    • The post is short enough for the channel you will use.
    • You are pairing it with a photo you took, or one you have the right to use.

    Common mistakes

    • Asking it to "make it more exciting," which often adds claims you cannot stand behind.
    • Letting it invent reviews, "number one in town," or a discount.
    • Pasting someone else's review with a last name or private detail.
    • Posting the draft with a leftover "[trade]" or a fake phone number.
    • Using one long post in a place that needs a short caption.
    • Treating the three drafts as three new facts. They are three ways to say what you already said.

    Extra tips and tricks

    1. Paste text you already published, not a brainstorm. The safer the source, the safer the posts.
    2. Ask for three drafts so you can pick one. You do not have to use all three.
    3. Add your real phone number or a link after you copy the draft out of the chat.
    4. Match the photo to the words. If the post is about hedge trimming, do not attach a random stock photo of a pool.
    5. Save the edited post you actually used. Next month you can come back to your own words instead of starting over.

    Variation prompts

    One social post and one Google Business Profile update:

    Turn the text below into 1 short social post and 1 short Google Business Profile update for a local [trade] business. Keep the tone plain and helpful. Include an invite to call or write. Do not invent reviews, prices, or results. Text: [paste your existing description]

    Three posts, one for each service in the source text:

    Turn the text below into 3 short social posts for a local [trade] business, one post for each service named in the text. Keep the tone plain and helpful. Include an invite to call or write. Do not invent reviews, prices, or results, and do not add a service that is not in the text. Text: [paste your existing description]

    In the news

    ChatGPT can now turn still photos into GIFs.

    On November 4, OpenAI launched Images 2.6 in ChatGPT on every plan. It can turn a still product photo or mascot into a short looping GIF.

    If you try it, use a photo you own or have the right to use. Check the result before you post it. A moving logo or a simple product loop can help a post stand out, but it still has to look like your business.

    Read the OpenAI announcement

    From the blog

    6 Marketing Plays Working Right Now That Feel Like Cheating

    Most marketing money leaks out of quiet gaps like a missed call, a text nobody answered, or a review nobody asked for. The post shares six plays to close those gaps, with scripts you can copy today.

    If you use the email and social drafts on this page, that post is a good next read. The first plays are about answering fast and asking for a review after a job, in your own words.

    A next step, if you want one

    You can run all three of these on your own this week. If you want help fitting them into your follow up, your job process, or your weekly posts, Lanco can help when it truly fits. No pressure. If you can do it yourself, go for it.

    Want the next issue in your inbox? Join the Lanco Newsletter. It is free, and you can unsubscribe any time.

    Join the Lanco Newsletter

    Talk soon!

    Nic Polanco Jr.

    CEO and Founder, Lanco Ignite

    Website Design•Local SEO•Google Reviews•AI Automation•Meta Ads•Cyber Solutions•Fast Follow-Up•5-Star Reputation•Website Design•Local SEO•Google Reviews•AI Automation•Meta Ads•Cyber Solutions•Fast Follow-Up•5-Star Reputation•